Spray Pure Polyurea Elastomer Waterproof Coating For Pool

Descriptions

TH8023 is a polyurea elastomer for pool dedicated.

Typical uses

Viewing pool, swimming pool, hot spring pool, water reservoir, etc.

Proportion

Component A: Component   B= 1:1

Component A: 220KG/bucket Component B: 210KG/bucket 

Storage conditions

1.The storage temperature should be 5-40ºC.

2.Under normal storage and transportation conditions, the storage period is not less than 6 months from the date of production.

3.Store in a cool, ventilated environment, avoid direct sunlight, prohibit close to fire sources, and prevent collisions.

Construction   Notes 

1.During construction, the temperature of the substrate must be 3°C higher than the dew point temperature.

2.Before the product is used, component B should be fully stirred.
3.The system has a 100% solid content, and it is strictly forbidden to add any diluent.
4.When constructing in a confined space, maintain good ventilation.
5.When using this product, you need to wear work clothes, goggles, gas masks, gloves and other protective equipments. 

Features &

advantages

1.High alkali proof, acid proof, salt resistance, aging resistance.

2.High wear resistance, impact resistance, chemical resistance.

3.High adhesion, high elongation, high tear strength.

4.High thermal stability, high resistance to freeze-thaw.

5.Seamless, flexible, waterproof, anti-corrosion, anti-slip.

6.Fast cure, sprayed & formed on any curved surface without sagging.

8.100% solid, solvent-free construction safety and eco-friendly.

9. Moisture and temperature insensitivity during processing.

10.No chalking and fading in long-term outdoor use.

11.Heat insulation and heat control

Item

Technical Index

GB/T 23446-2009 II

TH-8023

Solid content (%)

≥98

99

Gel time(s)

≤45

15

Surface drying time (s)

≤120

55

Tensile strength (Mpa)

≥16

18

Elongation at break(%)

≥450

480

Tear strength (N/mm)

≥50

65

Foldability at low temperature(℃)

≤-40

≤-40

Water   impermeability(0.4Mpa,2H)

No water leakage

No water leakage

Adhesion strength(Mpa)

≥2.5

3.5

Water absorption(%)

≤5

2.0

Aging properties at   maintained extension

Heat aging

No crack & deformation

No crack & deformation

Artificial aging

No crack & deformation

No crack & deformation

Heat treatment

Elongation at break(%)

≥400

475

Alkali treatment

Elongation at break(%)

≥400

465

Acid treatment

Elongation at break(%)

≥400

465

Salt treatment

Elongation at break(%)

≥400

480

Artificial aging

Retention of tensile   strength(%)

80～150

98

Elongation at   break(%)

≥400

465

Foldability at low   temperature (℃)

≤-35

-39

Hardness(Shore A)

≥80

90±5

Wear resistance(750g/500r)/mg

≤30

25

Impact resistance (kg/m)

≥1.0

1.3

Color

Customized